Tel : +82 10 3286 2644
FAX: +82 31 660 7004
Email : viscosmo@gmail.com
Web : www.viscosmoink.com
2016년 8월 12일 금요일
DYE SUBLIMATION INK FOR DX4,5,7 & RICOH GEN4,5
Tel : +82 10 3286 2644
FAX: +82 31 660 7004
Email : viscosmo@gmail.com
Web : www.viscosmoink.com
2016년 6월 27일 월요일
Cold Transfer System
The exceptional technology can transfer graphics on a variety of materials without heating press. The process of a cold transfer printing is the almost same as dye sublimation printing. However, the cold transfer printing works even with the material which is easily deformed by heat press because graphics are completely transferred with our transfer PET Film and liquid by none-heating press.
With simple process, the none-heating transfer technology provides higher quality graphics with long-durability, scratch-proof, water-proof than conventional printing methods like UV printing, water transfer printing Silk-screen printing and offset printing and more.
1st step print graphic on Transfer PEP film
with Latex or eco solvent ink
2nd step Roll pressing supply transfer liquid between
material and transfer PET film
3rd Step Peel a transfer PET film
With Transparent PET Film
1.Print a graphic on a transfer PET film with eco solvent ink or latex ink.
2.Load the PU or TPU leather and the printed Transfer PEP film and supply
3. Do pressing job with normal cold laminator
4. Peel a transfer PET film in one hours after pressing job
With Transparent PET Film
1. Print a graphic on a transfer PET film with eco solvent ink or latex ink
2.Load the TPU leather and the printed Transfer PEP film
and supply Transfer liquid between them
3. Do pressing job with normal cold laminator
4. Peel a transfer PET film on the back of TPU leather
in one hours after pressing job.
2016년 5월 24일 화요일
2016년 5월 20일 금요일
3D Sublimation Transfer Film
3D Sublimation Transfer Film /
Film for 3D sublimation trasfer /
3d Sublimation films phone cases
Film for 3D sublimation trasfer /
3d Sublimation films phone cases
Due to its unique high porosity design our 3D film holds up to 50% more ink than other competitive products on the market without losing any image clarity. Our 3D film produces sharp smooth finishes that are virtually dry on printing, therefore greatly reducing mess and waste.
- High porosity coating dries within seconds of leaving the print head resulting in no more smeared images on high production runs
- The glass-like coated surface prints a mirror-like finish which equates to glossy transfers of your images
- The unique surface permits heavier ink loads resulting in extremely vibrant transfers
- High quality ink transfer with no mess and no pooling ink on the surface of your film
- The most cost offective 3D film on the market
- Available to purchase without being tied into buying expensive machinery or licensing agreements
- Utilising the optimal micron thickness and anti-pop technology, VISCOSMO 3D film allows just the right amount of stretch to avoiding popping, creep smearing and film creasing. Costly film and product wastage is therefore greatly reduced.
Tel :
FAX: +82 31 660 7004
Email : sales@viscosmo.com/ viscosmo@gmail.com
Web : www.viscosmo.com
2016년 5월 2일 월요일
Ink Filling Machine & Accessories
Ink Filling Machine
For Empty Ink Pouch
For Assembled Cartridges
The ink filling machine is designed to fill ink into assembled 440ml and 220ml cartridges of Mimaki, Roland and Mutoh. The filling machine has two cartridges slots then You can fill two cartridges at one time. You need to set up the time of filling 440ml or 220ml ink capacity then it automatically fill ink up to 440ml or 220ml ink capacity. It is simple and easy to fill ink in to assemble cartridges. And the filling machine is available With two model for watera based ink and solvent based ink.
Accessories
Suction Machine
The suction machine removes air after filling ink into an ink pouches. It can works with any kind of inks like solvent, waterbased and UV inks. It is simple and portable to remove air from the ink pouch. You can Adjust the strength of suction power.
MBIS Assistant Tool
The tool is designed to fill ink into 2 liter ink pouch for Mimaki MBIS system. The nozzle of MBIS Assistant tool is made to fit exactly to a mouthpiece of 2 Liter ink pouch. Therefore, there is no possibility that ink leaks or air goes in ink pouch. With the tool, you can fill ink into 2 liter ink pouch without any hassle.
ToolMouthpeice Sealer
The sealer is designed to seal the front of mouthpiece of 440ml and 220ml Compatible cartridges after filling. In addition to this tool, we supply the small round shape aluminum as consumable. After sealing the front of mouthpiece, it looks clean and safe.
Cartridge Sensor Adhesive Tool
The tool helps to place and attach the sensor of 440ml and 220ml compatible cartridge on the correct position. It is very important to attach the sensor in the cartridges because the sensor does not come out and printer still works even though ink in the pouch is empty if the sensor is attached on the incorrect position.
Tel :
FAX: +82 31 660 7004
Email : sales@viscosmo.com/ viscosmo@gmail.com
Web : www.viscosmo.com
Ink Pouch & Cartridge
Ink Pouch
All of our ink pouches are layered with a block-out film which protects ink from sunlight or lighting for waterbased, solvent as well as UV inks. We have standardized sizes of each ink pouch but we are able to make any size of ink pouch for your special application if you guarantee MOQ.
For Mimaki, Roland and Mutoh
- size : 90*255mm(all side sealed for
front filling)
90*265mm(end open for rear filling)440ml ink pouch
- Size : 90*510mm(all side sealed for
front filling)
90*570mm (end open for rear filling)600ml ink pouch
- Size : 90*520mm(all side sealed for
front filling)
90*570mm(end open for rear filling)
*. Compatible printer: Mimaki/Roland/ Mutoh:
1. Size: 150X300X40(M)mm
2. Ink capacity: 2L
3. Type: M type on the side
4. Front ink filling
5. Compatible printer: Mimaki
1 & 2 Liter Ink PouchFor Ocea
1. Size: 210X170X70(M)mm
Ink capacity : 1L
2. Size : 210X270X70(M)mm
Ink capacity : 2L
3. Front ink filling
4. Compatible printer:
OCE Arizona 550XT/550GT/
360XT/360 GT/ 300 GT/ 250 GT
5. Accessory : coupling body available
· 1 Liter for hp DJ 9000/10000s
1 Liter For hp DJ 9000/10000s
1. Size: 125X360X40(M)mm (all side sealed
for front filling)
125X460X40(M)mm (end open for
rear filling)
2. Type: M type on the side
3. Compatible printer: hp DJ 9000/10000s
· 1 Liter Ink Pouch for Epson GS 6000 & Mutoh
For Epson GS 6000 & Mutoh
1. Size: 125X270X40(M)mm
2. Ink capacity: 950ml (Epson GS6000)
1L (Mutoh)
3. Type: M type on the side
4. Front ink filling
5. Compatible printer: Epson GS6000/Mutoh
6. With plates on both side
1 Liter Ink Pouch
For NITE CISS
1. Size: 160X350 (All side sealed for front
filling)
160X400 (End open for rear filling)
2. Ink capacity : 1L
3. Compatible printer: Mimaki/Roland/Mutoh
Cartridge
Compatible Cartidge
For Mimaki, Roland and Mutoh
For Mimaki, Roland and Mutoh
Mimaki / Roland / Mutoh
▲ With Chip Solution For Mimaki, Roland, Mutoh
▲ With Smartchip Socket for Mutoh
With smartchip socket on the back of cartridges, It is not required to remove cartridge from the printer to change every single smartchip just unload and load the smartchip from the socket
▲ With Single Use Chip Socket For Roland and Mimaki
With single chip socket on the back of cartridges, it is not required to remove cartridges from the printer, to change every new single chip. Just unload and load the chip from the socket
With single chip socket on the back of cartridges, it is not required to remove cartridges from the printer, to change every new single chip. Just unload and load the chip from the socket
Tel :
FAX: +82 31 660 7004
Email : sales@viscosmo.com/ viscosmo@gmail.com
Web : www.viscosmo.com
피드 구독하기:
글 (Atom)