2016년 11월 11일 금요일

2016년 10월 21일 금요일

HEAT TRANSFER FILM






Tel :  +82 10 3286 2644
 FAX: +82 31 660 7004
Email :  viscosmo@gmail.com 
Web : www.viscosmoink.com

2016년 9월 29일 목요일

Heat Press Machine MROD SERIES 1835/1855/3155

 Main Features

  • Oil heated press machine for uniform temperature and wider heating surface 
  • Precut Fabric on transfer paper Roll
  • Precise Control for Belt tension and balance by Air Pressure
  • Auto take-up system for Fabric, transfer paper and protection paper
  • Automatic preheating and turn-off timer
  • Useful control panel and Easy Operation




Tel :  +82 10 3286 2644
 FAX: +82 31 660 7004
Email :  viscosmo@gmail.com 
Web : www.viscosmoink.com

Heat Press Machine MRD SERIES 1826/1835


Main Features

  • Electrical drum heating with multi heating zones and minute control of temperature
  • Precut Fabric on transfer paper Roll
  • Precise Control for Belt tension and balance by optimized motor controller
  • Auto take-up system for fabric, transfer paper and protection paper
  • Automatic turn-off timer
  • Useful control panel and Easy Operation






Tel :  +82 10 3286 2644
 FAX: +82 31 660 7004
Email :  viscosmo@gmail.com 
Web : www.viscosmoink.com

Heat Transfer Solution



High Quality Heat Transfer Vinyl

· VISCOSMO is a professional Korean manufacturer and supplier of high performance thermal transfer vinyl materials targeted at the textile and garment market.

· VISCOSMO has obtained the valuable experience and knowledge in the garment industry over many years, especially through digital textile printing and heat transferring processes.

· The key advantages of VISCOSMO heat transfer film are the vibrant colors, superior wash ability, easy weeding and suitability for a wide range of applicable fabrics.


Main Product

Other Product
Dye Sublimation Ink / DTG Ink  / UV Ink / Dye Sublimation Paper etc
 


Tel :  +82 10 3286 2644
 FAX: +82 31 660 7004
Email :  viscosmo@gmail.com 
Web : www.viscosmoink.com

2016년 6월 27일 월요일

Cold Transfer System



 The exceptional technology can transfer graphics on a variety of materials without heating  press. The process of a cold transfer printing is the almost same as dye sublimation printing. However, the cold transfer printing works even with the material which is easily deformed by heat press because graphics are completely transferred with our transfer PET Film and liquid by none-heating press.
 With simple process, the none-heating transfer technology provides higher quality graphics with long-durability, scratch-proof, water-proof than conventional printing methods like UV printing, water transfer printing Silk-screen printing and offset printing and more.
1st step print graphic on Transfer PEP film
with Latex or eco solvent ink
2nd step Roll pressing supply transfer liquid between
material and transfer PET film
3rd Step Peel a transfer PET film




With Transparent PET Film
 

1.Print a graphic on a transfer PET film with eco solvent ink or latex ink.
 2.Load the PU or TPU leather and the printed Transfer PEP film and supply

3. Do pressing job with normal cold laminator

4. Peel a transfer PET film in one hours after pressing job






With Transparent PET Film



1. Print a graphic on a transfer PET film with eco solvent ink or latex ink




 2.Load the TPU leather and the printed Transfer PEP film
and supply Transfer liquid between them


3. Do pressing job with normal cold laminator




4. Peel a transfer PET film on the back of TPU leather
in one hours after pressing job.


2016년 5월 24일 화요일

2016년 5월 20일 금요일

3D Sublimation Transfer Film

3D Sublimation Transfer Film / 
Film for 3D sublimation trasfer / 
3d Sublimation films phone cases




 Due to its unique high porosity design our 3D film holds up to 50% more ink than other competitive products on the market without losing any image clarity. Our 3D film produces sharp smooth finishes that are virtually dry on printing, therefore greatly reducing mess and waste.
  • High porosity coating dries within seconds of leaving the print head resulting in no more smeared images on high production runs
  • The glass-like coated surface prints a mirror-like finish which equates to glossy transfers of your images
  • The unique surface permits heavier ink loads resulting in extremely vibrant transfers
  • High quality ink transfer with no mess and no pooling ink on the surface of your film
  • The most cost offective 3D film on the market
  • Available to purchase without being tied into buying expensive machinery or licensing agreements  
  • Utilising the optimal micron thickness and anti-pop technology, VISCOSMO 3D film allows just the right amount of stretch to avoiding popping, creep smearing and film creasing. Costly film and product wastage is therefore greatly reduced.
 

 
Tel : +82 2 875 1770 
 FAX: +82 31 660 7004
Email : sales@viscosmo.com/ viscosmo@gmail.com 
Web : www.viscosmo.com

2016년 5월 2일 월요일

Ink Filling Machine & Accessories


Ink Filling Machine

For Empty Ink Pouch


  The ink filling machine is designed to fill ink into a variety of different empty ink pouch. The holder for ink pouch can be changed by the shape of mouthpiece of ink pouch to hold each ink pouch. After holding the ink pouch, push the needle into the rubber of Mouthpeice and fill ink. The ink filling machine is compatible with waterbased, solvent and UV ink. And the filling machine has suction function after filling.



For Assembled Cartridges




The ink filling machine is designed to fill ink into assembled 440ml and 220ml cartridges of Mimaki, Roland and Mutoh. The filling machine has two cartridges slots then You can fill two cartridges at one time. You need to set up the time of filling 440ml or 220ml ink capacity then it automatically fill ink up to 440ml or 220ml ink capacity. It is simple and easy to fill ink in to assemble cartridges. And the filling machine is available With two model for watera based ink and solvent based ink.



Accessories





Suction Machine
 The suction machine removes air after filling ink into an ink pouches. It can works with any kind of inks like solvent, waterbased and UV inks. It is simple and portable to remove air from the ink pouch. You can Adjust the strength of suction power.





MBIS Assistant Tool
 The tool is designed to fill ink into 2 liter ink pouch for Mimaki MBIS system. The nozzle of MBIS Assistant tool is made to fit exactly to a mouthpiece of 2 Liter ink pouch. Therefore, there is no possibility that ink leaks or air goes in ink pouch. With the tool, you can fill ink into 2 liter ink pouch without any hassle.



ToolMouthpeice Sealer
 The sealer is designed to seal the front of mouthpiece of 440ml and 220ml Compatible cartridges after filling. In addition to this tool, we supply the small round shape aluminum as consumable. After sealing the front of mouthpiece, it looks clean and safe.
 




Cartridge Sensor Adhesive Tool
 The tool helps to place and attach the sensor of 440ml and 220ml compatible cartridge on the correct position. It is very important to attach the sensor in the cartridges because the sensor does not come out and printer still works even though ink in the pouch is empty if the sensor is attached on the incorrect position.




  Tel : +82 2 875 1770 
 FAX: +82 31 660 7004
Email : sales@viscosmo.com/ viscosmo@gmail.com 
Web : www.viscosmo.com